The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Tony Williams
Subject: Re: Amplifying stage with *negative* Voltage gain??
Date: Wed, 11 Dec 2002 11:49:27 +0000 (GMT)
References: <3DEF1DC0.5EDD@Spam.Bots> <firstname.lastname@example.org> <3DEF5BEA.2614@Spam.Bots> <3DF0A422.46EE@Spam.Bots> <email@example.com> <3DF263CE.3868@Spam.Bots> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org>
NNTP-Posting-Date: Wed, 11 Dec 2002 11:50:14 +0000 (UTC)
User-Agent: Pluto/1.14i (RISC-OS/3.60)
In article ,
Paul Burridge wrote:
> > Clip say a 1k resistor in series with the scope probe
> > and have a look again. All voltages will be reduced,
> > but the 1k will provide some local resistive isolation
> > of the scope probe.
> Have now done so.
> Now getting 0.3v p-p in when probe set on x1;
> getting 1.3v p-p in when probe set on x10;
> gwtting 0.32v p-p out with probe set on x1;
> getting 1.5v p-p out with probe set on x10.
> Does that tell us anything?
Slightly inconclusive. But it does suggest.
The Gain of your follower is 1, (it's ok).
The x1 input impedance of the scope probe is capacitive,
enough to affect both input and output (o/p slightly).
The signal source is quite tender (as you have just
confirmed in another post). Perhaps the addition of
a x1 scope probe is inducing a resonance or oscillation.
The oscillation could even be the emitter follower itself
Is your signal source buffered, or are you coming straight
off a resonant circuit within it?
Is the signal-source built on that same bit of stripboard?
Sharing the same power rail even?
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup