Reply-To: "fred bartoli"
From: "fred bartoli"
References: <email@example.com> <firstname.lastname@example.org>
Subject: Re: SPICE simulation goes awry?
Date: Fri, 13 Dec 2002 17:58:34 +0100
X-Newsreader: Microsoft Outlook Express 5.00.2314.1300
Organization: Guest of ProXad - France
NNTP-Posting-Date: 13 Dec 2002 17:59:43 MET
Terry Pinnell a écrit dans le message :
> There you go, Paul - told you Fred would sort it in a jiff!
> Hey, Fred, how long did it take to reverse that netlist? I usually get
> in an awful mess. Despite searching in vain a year or so ago, I still
> reckon there *must* be some little utility out there that could do a
> passable job at drawing a schematic from a netlist.
Ones as simple as that one are made on the fly, i.e. max 5 minutes included
the time to fire the software :-)
This is as simple as taking one comp after another. Just walk through the
netlist and draw.
Usually with complex netlists the main pb to manage is wires that cross
because of components misplaced.
So to limit the number of "redraw" first have a 3 minutes look at the
netlist to get a feeling of how it works, then begin to draw it, preferably
with a schematic tool that has "powerful" dragging features.
I also sometimes do that when I have to reverse complexes pcbs to schematics
and I don't find the manuals.
For the utility I've heard about one but I never found it. Maybe someone
here is aware of ?
> BTW, Paul e-mailed me the schematic an hour earlier, and it's
> electronically equivalent to yours.
> Terry Pinnell
> Hobbyist, West Sussex, UK