The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
Subject: Re: Question about 6V (4 X 1.5V battery) to 5V for MCU operation
Date: Thu, 19 Dec 2002 01:21:49 -0600
Organization: TICON.NET, Inc.
NNTP-Posting-Date: 19 Dec 2002 07:17:29 GMT
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
I have run the 5.5v pics off 4 fresh batteries (6.3v) and a dropping diode
with no failures. However, there is no guarantee it will always work.
"Reala" <-> wrote in message news:email@example.com...
> I would like to design a device with 4 batteries for power source.
> It is about 1.5V X 4 = 6V. Normally, MCU runs at 5V.
> What is the normal method for this issue?
> Should I add a diode IN4001 for voltage drop (6V - 1V =5V)?
> Is this suitable enough for simple application? Any idea?
> or we do not need to concern this issue because of the internal resister
> the battery?
> (The actually voltage of the battery is about 1.3V....)
> Thanks you.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup