The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Alun Palmer
Subject: Re: How to check for a 50 or 75 ohm connector
Date: 23 Dec 2002 18:43:48 GMT
References: <email@example.com> <firstname.lastname@example.org>
NNTP-Posting-Host: host81.fastdial.net (184.108.40.206)
"Brian Reay" wrote in
> "Alun Palmer" wrote in message
>> DarkMatter wrote in
>> You can't change the impedance and keep the same dimensions. If there
>> is a standard,
> Yes you can.
> With an air dielectric the formula for the impedance for a coaxial pair
> of conductors is:
> 138 log (D/d) where D is inside dia of outer and d is outside dia
> of inner.
> If there is a different dielectric the above formula is modified by a
> fact of
> 1 / (k ^1/2) where k is the dielectric constant of the insulator.
Well, yes, but they did have the same dielectric
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup