The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Phil Allison"
Subject: Re: Combine stereo outputs for twice voltage?
X-Newsreader: Microsoft Outlook Express 5.50.4522.1200
Date: Fri, 27 Dec 2002 09:59:30 +1100
NNTP-Posting-Date: Fri, 27 Dec 2002 09:49:59 EST
Organization: Telstra BigPond Internet Services (http://www.bigpond.com)
"John Fields" wrote in message
> On Wed, 25 Dec 2002 06:22:49 GMT, Peter Nielsen
> >I am aware of paralleling amp outputs for more current, and bridge
> >configurations ... but is there anyway to add indentical signals from
> >the stereo outputs of an audio amp to derive one channel at twice the
> Would it be possible for you to post a little more information about
> the amplifier you have in mind for the application, the load, and
> the application itself?
** You must NOT ask that - it is BREAKING the **RULES**.
> For example, it would be helpful to know if the outputs of the amp
> provide single-ended bipolar outputs swinging between + and - rails
> referenced to ground or bridged outputs referenced to half of the
> (positive?) supply rail. What kind of power are you expecting the
> amp to supply to the load? Are the amp outputs DC coupled to the
> load? Any other tidbits would also be nice.
** NO - on a NG you MUST make wild guesses as to all the relevant facts.
No question poster is EVER to be queried or doubted. Ask Mr Meyer.
These wonton boys are GODS. We are their flies.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup