The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
Subject: Re: what is best & simple PCB maker?
Date: Sat, 28 Dec 2002 05:02:43 GMT
Organization: CanTech Online
References: <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com>
NNTP-Posting-Date: Sat, 28 Dec 2002 05:00:53 +0000 (UTC)
X-Newsreader: Forte Free Agent 1.21/32.243
X-Cache: nntpcache 2.3.3 (see http://www.nntpcache.org/)
On Sat, 28 Dec 2002 01:22:02 GMT, firstname.lastname@example.org (Nico Coesel)
>"Michael Culley" wrote:
>>Are you talking about Easytrax from protel? Have you got it to work above
>Autotrax from Protel always ran at 800x600 on my PC's. Some hacking of
>a driver file was necessary, but I always managed to get it working...
>Same goes for good old Orcad 3.x.
>It doesn't run on Windows 2000 though.
>I've been using Autotrax for years with good results. Even the
>autorouter is usefull for boards with loads of through-mount LS logic
As long as your idea of good autorouting is "topside east-west,
bottomside north-south and use a zillion vias to dodge anything at
all" then you might be happy with the AutoTrax autorouter. I'm not.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup