The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Spehro Pefhany
Subject: Re: LED Ballast
References: <%AEP9.18271$Jb.email@example.com> <firstname.lastname@example.org> <22MP9.email@example.com> <firstname.lastname@example.org> <email@example.com> <1yiQ9.1856$Hs3.firstname.lastname@example.org>
X-Newsreader: Forte Agent 1.92/32.572
Date: Tue, 31 Dec 2002 15:41:03 GMT
NNTP-Posting-Date: Tue, 31 Dec 2002 10:41:03 EST
On Tue, 31 Dec 2002 15:17:17 GMT, the renowned "Da Man"
>Use a fuseable resistor. Two parts in one! I wonder if they are avalible in
>UL / CSA / CE approved versions for 120 / 220 V AC?
The safety issue is one of electrocution of the user, and the only
viable solution is proper insulation. It would be nice if the
insulation allowed the light through as well.
Fusible resistors don't seem to carry approvals. I don't know why,
perhaps they are not considered "safety" related but are typically
used to prevent further destruction. Maybe JW knows?
"it's the network..." "The Journey is the reward"
email@example.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup