The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Peter Bennett
Subject: Re: Wiring of Motor
Date: Tue, 31 Dec 2002 09:51:43 -0800
Organization: Home for the Hopelessly Helpful
X-Newsreader: Forte Agent 1.8/32.548
On 31 Dec 2002 07:15:58 -0800, email@example.com (David) wrote:
>Ok this is probably pretty easy but I can't figure it out.
>I have a motor with two wires.
>I have a battery with two wires.
>I hook white to white and red to red and the motor goes one way.
>I hook white to red and red to white and the motor goes the opposite
>I have to push button switches.
>Is it possible to wire the two switches so that one will make the
>motor go forwards and the other will make it go backwards and if so
If you have single pole, double throw switches (three terminals) it is
Connect one motor leads to the "common" terminal of each switch.
Connect the "normally closed" contacts of both switches to the
negative terminal of the battery, and the "normally open" contacts to
the positive terminal of the battery.
Peter Bennett, VE7CEI
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver-webpages.com/van-ps
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup