From: "Michael Culley"
Subject: Re: Need RS232 code for PIC
Date: Sat, 4 Jan 2003 10:44:28 +1100
X-Newsreader: Microsoft Outlook Express 6.00.2720.3000
The wiring for your serial port seams not to be right. You should be
connected to pins 2 and 3, not 3 and 4. They should be tx and rx not rx and
cts. You don't need the flow control pins connected to each other, just set
it up in your app on the PC to use no flow control. All you need to connect
to the serial port to get it working is pins 2,3 and 5.
"Matt Foster" wrote in message
> How's this? I don't know what to do with V+ on the 233
> I don't know what to do with what was RA4 on the PIC
> "Frank Bemelman" wrote in message
> > "Matt Foster" schreef in
> > news:MgoR9.5366$KF3.email@example.com...
> > > Cheers
> > >
> > > I'm now using http://matthewfoster.myby.co.uk/lousyattempt2.jpg
> > Now that you have used the 16F628, you better use the internal
> > UART, so TX is RB2 and RX is RB1. You can connect the switches
> > to RB3, RB4, RB5, RB6 and RB7.
> > Check with the datasheet for actual pinnumbers.
> > Also, it is more common to put the switches between inputs and
> > ground, and the resistors between inputs and +5V. Not a
> > big deal.
> > You can't use the (test)software with this schematic, the
> > software from the link I gave earlier.
> > --
> > Thanks,
> > Frank Bemelman
> > (remove 'x' & .invalid when sending email)
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.434 / Virus Database: 243 - Release Date: 25/12/2002