From: John Woodgate
Subject: Re: do to I get when I combine four 1000uF 16 V in parallel?
Date: Sun, 5 Jan 2003 21:58:21 +0000
Organization: JMWA Electronics Consultancy
Reply-To: John Woodgate
NNTP-Posting-Date: Mon, 6 Jan 2003 08:13:15 +0000 (UTC)
X-Newsreader: Turnpike (32) Version 4.01 <5Z8C9wtxbnpWyFnyfFzqmVF739>
I read in sci.electronics.design that Spehro Pefhany
wrote (in <email@example.com
om>) about 'do to I get when I combine four 1000uF 16 V in parallel?',
on Sun, 5 Jan 2003:
>I fail to see how it can be less than 4 times the board area consumed
>by one radial-leaded capacitor (pi * r^2), regardless of how clever
Think axial leads instead. Now you can mount two flat down on the board,
rather less than a diameter apart and rest one on top of them, with
longer lead wires. The fourth one is a bit more dodgy - you need to
anchor it in place with a nylon tie.
But that still takes up much more room than four radial-leaded parts. I
suppose you could cross-stack the axial-lead parts like cordwood, if you
have enough height.
Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk
Interested in professional sound reinforcement and distribution? Then go to
PLEASE do NOT copy news posts to me by E-MAIL!