From: John Woodgate
Subject: Re: Reducing contact resistance for low volt use?
Date: Mon, 6 Jan 2003 19:54:31 +0000
Organization: JMWA Electronics Consultancy
Reply-To: John Woodgate
NNTP-Posting-Date: Mon, 6 Jan 2003 19:56:28 +0000 (UTC)
X-Newsreader: Turnpike (32) Version 4.01 <5Z8C9wtxbnpWyFnyfFzqmVF739>
I read in sci.electronics.design that John Fields
wrote (in <email@example.com>) about 'Reducing contact
resistance for low volt use?', on Mon, 6 Jan 2003:
>It comes through fine when I read it on this end with either Agent,
>Netscape, or OE, or from a couple of different ISP's, so the problem
>must be on your end. Not surprising.
On that specific subject alone, two dashes and a space, followed by a
carriage return, is the correct sig separator. As you can see above,
your sig appears in my response, which it should not, whereas mine won't
appear in any response you care to make to this post.
Unless you are using Outlook Depressed, which deletes the trailing space
and f***s the system.
Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk
Interested in professional sound reinforcement and distribution? Then go to
PLEASE do NOT copy news posts to me by E-MAIL!