The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
Subject: Re: Reducing contact resistance for low volt use?
Summary: What do you think of these ping times eh?
Reply-To: You can't see me, and I pass right through planets...
References: <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org>
X-Newsreader: Forte Agent 1.91/32.564
Date: Tue, 07 Jan 2003 05:01:20 GMT
NNTP-Posting-Date: Tue, 07 Jan 2003 00:01:20 EST
On Mon, 6 Jan 2003 16:53:20 -0000, "Mjolinor"
>Talking of 100A and wire size I carry a 3 inch length of "wire" in my wallet
>rated at 100 amp continuous 1/8 inch wide and 3/32 inch thick. It was given
>to me after a trip round a factory research department and it is (under a
>microscope) silver tubes filled with ceramic dust and then rolled until its
>thin enough to use. I suppose I should mention that it needs to run at -25 C
>it being superconductor. :)
Sell the guy a couple strips of that then.
He'll STILL have termination problems.
I suggest that the 24 bank of one ton each batteries is what he
Maybe what should be made is an RC earth mover.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup