The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Phil Allison"
References: <firstname.lastname@example.org> <8npR9.16063$jM5.email@example.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org>
Subject: Re: Low leakage parts
X-Newsreader: Microsoft Outlook Express 5.50.4522.1200
Date: Wed, 8 Jan 2003 08:14:01 +1100
NNTP-Posting-Date: Wed, 08 Jan 2003 08:03:51 EST
Organization: Telstra BigPond Internet Services (http://www.bigpond.com)
"Tom Bruhns" wrote in message
> I have a small catalog around here somewhere that lists high-value SMT
> resistors; it was from at least 10 years ago (may have tossed it by
> now!) Anyway, http://www.irctt.com/pdf_files/HR.pdf shows values in
> 0805 size up to 50 gigohms.
** Gohm resistors are easy to get now - just not in 1978 when I had to
bug to make mic pre-amps. BTW I have a couple of old 1 G ohm resistors
fitted inside sealed glass tubes - seems the way to go to me.
Commercial fet pre-amps for condenser mics all seem to use tiny
carbon comp 1 G ohm resistors and the PCBs are normally coated in the
sensitive area to keep out moisture - essential for a hand held mic.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup