The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
Date: Thu, 09 Jan 2003 11:56:27 +0100
From: Rene Tschaggelar
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.0.1) Gecko/20020823 Netscape/7.0
X-Accept-Language: en-us, en, de-ch
Subject: Re: 12 bit a/d converter to 8 bit mcu?
X-Abuse-Report: Send abuse reports to email@example.com
Organization: http://www.TeraNews.com - FREE NNTP Access
> I have a 12 bit analog-to-digital converter I need to interface to an
> 8-bit Risc processor through its 8-bit Usart. I know how to read in
> 8-bit data, but the received data appears higher valued than it should
> when I'm sampling off 12-bit data. I believe the mcu's 8-bit receiver
> is sampling the 8 first and most significant bits. Could I be missing
> something like a few of the more significant bits?
Believing is not sufficient in this case.
UART connected ADCs are very unlikely.
Usual are 3 & 4 wire interfaces (din,dout,clk,cs).
The timing and states according to the datasheet have to be met exactly.
Ing.Buero R.Tschaggelar - http://www.ibrtses.com
& commercial newsgroups - http://www.talkto.net
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup