The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: email@example.com (tom)
Subject: Re: how to reduce noise from 555 timer...???
Date: 9 Jan 2003 03:59:13 -0800
NNTP-Posting-Date: 9 Jan 2003 11:59:13 GMT
what might be an even more appropiate adc than the ad7714 for a
weightscale design is the ad7730 which is optomized for weight scale
See http://www.analog.com/ for more details.
firstname.lastname@example.org (ALG460) wrote in message news:<email@example.com>...
> What is the mV output of your strain gage? Why do you need such a high gain?
> Such high gains make it difficult to tame noise, drift and thermal effects. If
> your design/time permits you might want to try switching to a sigma delta
> converter such as the analog devices AD7714. These can be directly connected to
> strain gages and have built in PGA amplifiers, filters, auto calibration and
> shift registers. They are somewhat complex to use but offer high performance
> and inherent noise rejection.
> If you suspect, as the previous poster mentioned, the 555 is causing the
> problem try adding a small resistance in series with the supply line to the
> 555. This could minimize any switching spikes and at 3hz is unlikely to make
> much difference to your circuit as far as rise times. Or try a different
> oscillator circuit all together such as a simple cmos inverter (74C14).
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup