The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Richard Soennichsen"
Subject: Re: silkscreening a front panel
X-Newsreader: Microsoft Outlook Express 6.00.2600.0000
NNTP-Posting-Date: Thu, 09 Jan 2003 18:55:42 EST
Organization: Prodigy Internet http://www.prodigy.com
Date: Thu, 09 Jan 2003 23:55:42 GMT
I have since ordered polyester ink, thinner, and catalyst from Nazdar.
Thanks again to all for the help.
"Richard Soennichsen" wrote in message
> OK, thanks to all for their input. I am going to make a hinged "rig" to
> to get a cleaner print. Also, the ink I am using is Textile ink, commonly
> used for t-shirts. I thought it might be a good choice as I can bake it
> in the oven. Has anyone used this ink?
> "Harry Davidson" wrote in message
> > On Thu, 09 Jan 2003 00:38:05 GMT, "Richard Soennichsen"
> > wrote:
> > >Has anyone any experience with doing their own silkscreening? I am
> > >to silkscreen a front panel. (powder coated alluminum) I used photo
> > >emulsion exposed through a mask made out of a transparency on a laser
> > >printer. The screen came out very nice. I am having trouble getting
> > >even, non-smudged print. Any help would be appreciated.
> > >
> > Hi Richard.
> > I do this all the time. Your problem could be caused by lots of things
> > but the first one I would suspect is that you probably have the screen
> > in contact with the surface to be printed. You *must* have it clear of
> > the surface, usually by about 3 to 5 mm (depending on various things
> > such as screen size and tension). This clearance is called the "snap"
> > in the industry terminology and is not optional.
> > If that's not the problem, I could suggest other possible causes - but
> > take a look at that first. Feel free to email me if you would like to
> > get into details.
> > Harry
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup