References: <email@example.com> <77PrIQCLZZI+Ew0X@jmwa.demon.co.uk>
Subject: phase shift diagram
Date: Mon, 13 Jan 2003 15:37:25 +1030
X-Newsreader: Microsoft Outlook Express 5.50.4920.2300
Can you guys be serious
"Spehro Pefhany" wrote in message
> On Sun, 12 Jan 2003 16:22:35 +0000, the renowned John Woodgate
> >I read in sci.electronics.design that Spehro Pefhany
> > wrote (in >om>) about 'phase shift diagram', on Sun, 12 Jan 2003:
> >>You can use a 2.4kVA 240V:240V transformer. Or connect your load
> >>backwards. What are you trying to do?
> >Make the kWh meter go backwards, probably.
> Ah, then just attach two standard capacitators to the flux disk,
> being careful to "balance the load" by spacing them evenly on either
> side. Each capacitator will provide 90 degrees of phase shift.
> Be careful of potentially (and currently) fatal electrocution and also
> beware that the power company may eventually become suspicious if they
> have to continually send checks/cheques of more than $100 a month or
> so out to you, so don't get too greedy.
> Best regards,
> Spehro Pefhany
> "it's the network..." "The Journey is the reward"
> firstname.lastname@example.org Info for manufacturers:
> Embedded software/hardware/analog Info for designers: