The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Mike Monett
X-Mailer: Mozilla 2.02 (Win16; I)
Subject: Re: Transistor amplifiers v. frequency in SPICE
References: <3E20D1C8.166C@sneakemail.com> <firstname.lastname@example.org> <email@example.com> <firstname.lastname@example.org>
Date: Mon, 13 Jan 2003 18:19:44 -0500
NNTP-Posting-Date: Mon, 13 Jan 2003 18:19:12 EST
Organization: Bell Sympatico
Paul Burridge wrote:
> James Meyer wrote in message news:<email@example.com>...
> > The line ".AC Dec 200 20k 10Meg" above turns on the AC small signal
> > analysis and sets the frequency span. What it *doesn't* do is identify the
> > signal source and its amplitude.
> Thanks. This is another message that my news client didn't show up.
> As Kevin has noted, I'm using a GUI type 'tick-box' interface rather than
> the good old command-line type of data input. If there isn't a box for those
> other paramaters, there's not much I can do about it. Of course, it could
> just be that I'm using the wrong simulation. There's another similar one
> with 2 sets of parameters to enter. Sigh... I wish I knew what the hell I
> was doing. :-(
Try Microcap. The free version is limited to 50 nodes or so, but that's
more than plenty for most things. You will like the error handling and
schematic entry. It's very fast and very easy, and fully integrated so
you don't have to load and unload separate programs. I see they are up to
version 7 now. That's two generations ahead of what I'm using, but I'm
quite satisfied with version 5.
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup