The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Shaun Davy"
Subject: Making 2 Layer PCB's
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
Date: Fri, 17 Jan 2003 16:29:05 +1100
NNTP-Posting-Date: Fri, 17 Jan 2003 16:18:58 EST
Organization: Telstra BigPond Internet Services (http://www.bigpond.com)
Just wondering if any of u electronic genius's out there have ever made 2
Layer PCBs at home.
Am building a board at moment that can't finish routing on single layer
cause of too many tracks so I guess I have to goto 2 layer board or work out
how to get protel to do single layer and get it to use wire links.
I have no troubles with the etching part but how do I take care of what is
usually the through hole plating bit. resistors and diodes etc I can solder
both sides of the board but I have a 28 pin socket for the pic and a DB9 and
DB25 PCB mount connector on the board. How do I get both sides of the board
to make contact with the pins??
Any suggestion appreciated
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup