The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
Date: Fri, 17 Jan 2003 11:58:05 +0100
From: Rene Tschaggelar
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.0.1) Gecko/20020823 Netscape/7.0
X-Accept-Language: en-us, en, de-ch
Subject: Re: Making 2 Layer PCB's
X-Abuse-Report: Send abuse reports to firstname.lastname@example.org
Organization: http://www.TeraNews.com - FREE NNTP Access
Shaun Davy wrote:
> Just wondering if any of u electronic genius's out there have ever made 2
> Layer PCBs at home.
> Am building a board at moment that can't finish routing on single layer
> cause of too many tracks so I guess I have to goto 2 layer board or work out
> how to get protel to do single layer and get it to use wire links.
> I have no troubles with the etching part but how do I take care of what is
> usually the through hole plating bit. resistors and diodes etc I can solder
> both sides of the board but I have a 28 pin socket for the pic and a DB9 and
> DB25 PCB mount connector on the board. How do I get both sides of the board
> to make contact with the pins??
Solder the pins on both sides.
Ing.Buero R.Tschaggelar - http://www.ibrtses.com
& commercial newsgroups - http://www.talkto.net
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup