The Cyber-Spy.Com Usenet Archive Feeds Directly From The Open And Publicly Available Newsgroup Sci.Electronics.Design
This Group And Thousands Of Others Are Available On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic, Opinions Or Content Posted To This Or Any Other Newsgroup. This Web Archive Of The Newsgroup And Posts Are For Informational Purposes Only.
From: Gary Tait
Newsgroups: sci.electronics.design
Subject: Re: SOFT PAD SWITCH, SOLENOIDS ??
Message-ID:
References:
X-Newsreader: Forte Agent 1.92/32.572 trialware
Date: Fri, 17 Jan 2003 23:57:39 -0500
NNTP-Posting-Host: 216.46.128.141
NNTP-Posting-Date: Fri, 17 Jan 2003 23:59:54 EST
Organization: WorldCom Canada Ltd. News Reader Service
On 17 Jan 2003 14:57:15 -0800, tim247@ptd.net (Timothy) wrote:
>I have a sound sampler that has large soft pad buttons that trigger
>sound effects. I would like to trigger these sound effects from a
>switch maybe 10 feet away from the box. What would be the best or
>easiet way to accomplish this? If the pads were simple make/break
>metal contact switches it would be easy to just add a momentary
>switch. How can I do it with a soft pad switch? It would be hard to
>tap off the board. Would I have to have some type of solenoid actually
>push the pad? If you have any good ideas or can help please post or
>email me. Thanks in advance.
>
>Tim
>Post a follow-up to this message
Conect dorectly up to the PCB of the sound generator PCB, where the
soft pad conencts.
Go Back To The Cyber-Spy.Com Usenet Web Archive Index Of The sci.electronics.design Newsgroup
|