The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: Glenn Ashmore
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.4) Gecko/20011128 Netscape6/6.2.1
Subject: Re: pcb software
References: <firstname.lastname@example.org> <3E282AE8.email@example.com> <3E29181B.BB48DC41@earthlink.net>
X-Abuse-Info: Please be sure to forward a copy of ALL headers
X-Abuse-Info: Otherwise we will be unable to process your complaint properly.
NNTP-Posting-Date: Sat, 18 Jan 2003 09:42:57 EST
Date: Sat, 18 Jan 2003 09:45:17 -0500
Robert Baer wrote:
> Eagle Cad was totally useless. It did not have the parts (schematic
> *or* layout) i am using. Completely non-intuitive (to me),
> frustrating as all hell to get parts, place, rotate, label, etc.
> 3.0 is more functional.
You didn't give it an honest try. It does have a couple of frustrating
idiosyncrasies and the documentation is poor but it is far more powerful
than CorelDraw unless Corel can check circuit rules, build a board from
a schematic, check for clearance and overlaps and generate gerber files.
There are all sorts of components in the libraries (a large number of
European brands though) and if you can't find the one you want you can
build your own. I made a device for the home built reed/coil current
sensor in about 5 minutes.
I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup