The Cyber-Spy.Com Usenet Archive Feeds Directly
From The Open And Publicly Available Newsgroup
This Group And Thousands Of Others Are Available
On Most IS NNTP News Servers On Port 119.
Cyber-Spy.Com Is NOT Responsible For Any Topic,
Opinions Or Content Posted To This Or Any Other
Newsgroup. This Web Archive Of The Newsgroup And
Posts Are For Informational Purposes Only.
From: "Ken McDonald"
References: <7FYW9.1208$PR2.firstname.lastname@example.org> <email@example.com>
Subject: Re: Don't do this! Just don't!
X-Newsreader: Microsoft Outlook Express 6.00.2800.1106
Date: Mon, 20 Jan 2003 21:24:38 GMT
NNTP-Posting-Date: Mon, 20 Jan 2003 16:24:38 EST
"Spehro Pefhany" wrote in message
> On Mon, 20 Jan 2003 20:49:26 GMT, the renowned "Ken McDonald"
> >"Thomas" wrote in message
> >> Ken McDonald wrote:
> >> >>>> +15
> >> >>>> |
> >> >>>> p
> >> >>>> 10K o <--------------10K -----x--- small offset
> >> >>>> t |
> >> >>>> | 49R9
> >> > How much power will a 49.9 ohm resistor connected to 15 volts
> >> > keep coming up with 4.5 watts.
> >> You are missing the 10K.
> >> Anyway, the pot would blow first if the 10K was not there. A 10 k pot
> >> be able to handle a lot of current.
> >I didn't miss it. Both resistors appear to be connected to the wiper of
> >pot. I need to find the FAQ on ascii schematics and see why I'm not
> >the schematic correctly.
> Ah, that's the problem. It could be worse. You just need to set your
> reader to use a fixed-width (not proportional) font such as Courier,
> then you'll see the 49R9 over further to the right, where it should
Thanks. What a difference. The schematic makes sense now.
> Best regards,
> Spehro Pefhany
> "it's the network..." "The Journey is the reward"
> firstname.lastname@example.org Info for manufacturers:
> Embedded software/hardware/analog Info for designers:
Go Back To The Cyber-Spy.Com
Usenet Web Archive Index Of
The sci.electronics.design Newsgroup